Select A Language - Oce 9600 User Manual

A dialog is displayed informing you that you can press 'on line' to continue or
stop to cancel the job.
Press the 'On line' button to continue the current print job.
2

Select a language

On the operating panel of the Océ 9600 Printer you can specify which language
you want to use for displaying printer information, such as status and error
messages.
By default, you can choose between two languages, which have been defined
for your system by the key operator (see chapter 10, 'Key operator settings' on
page 129).
If the key operator has specified only one language, it will not be possible
Note:
for you to choose. In that case, the language option will not appear on the
operating panel.
Select a language
Press the on line button on the printer operating panel to put the printer off line.
1
The 'Off line' message is displayed in the status window.
Press the left selection button to shift the focus to the Language option.
2
A shadow effect is used to indicate that the focus is set to this option.
Activate the Language option by pressing the right selection button.
3
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified language are no
longer dimmed.
Use the up/down buttons to switch between the predefined languages.
4
The language specific elements on the display are immediately customized to
5
reflect your language choice. Only the indicator for the language itself is in the
alternate language. This way you always know what your alternate language is.
Put the printer on line again by pressing the on line button. The printer now
6
uses the selected language.
Using the Océ 9600 Printer 35