Tree View; Table View - Oce 9600 User Manual

Not all options are available to all users. You must log into a particular
Note:
user mode to perform specific tasks with Océ 9600 Scan Manager (see 'User
modes' on page 121).

Tree view

The tree view displays:
the system name
the collapsible destination tree
the collapsible temporary store tree.
If you scan to a particular destination, that destination is displayed in bold as
well as the corresponding icon changes. The destination to which you last
scanned, is displayed in bold.
If you select a destination in order to view it's content in the right table viewer,
this destination will appear as having been selected. Figure 46 on page 90
shows that the destination 'Temp10' is selected.
If for any reason a scan to file cannot be sent to the appropriate remote
destination, the file will be stored in the 'Unsent' folder.

Table view

The table view (on the right side of figure 46 on page 90) displays the
filenames of the files in the opened destination or temporary folder.
Each file has the following information:
Name
Size
Type
Modified
Resolution
Image size.
If the currently viewed destination is the one you are scanning to, then the
scanned file will appear at the end of the table. If you currently view another
destination than the one you are scanning to, the scanned to destination is
displayed in bold.
Scan to file 91