Table of Contents
Advertisement
Press the green knob inside the roll holder (on the right side) to release the
4
locking mechanism (see figure 100) and remove the core from the holder.
[100] Pressing the green knob
You can place the new roll in the groove on top of the printer.
Note:
Slide the roll holder in the new roll of material while pressing the green knob.
5
Align the roll with the appropriate size indicator on the roll holder and release
6
the locking mechanism. This line has to be completely visible.
Use both hands to place the holder in the roll compartment (see figure 101).
7
[101] Positioning the roll
Loading supplies
left view
221
Advertisement
Table of Contents
