Oce 9600 User Manual page 269

Standard folding settings
the Océ 9600 system by the key operator are used. The following settings are
available:
Folded copy delivery (Stacker or Belt)
Folding legend (Leading or Trailing).
In the drivers, this setting is called the 'Folding orientation', with the
Note:
'Portrait', 'Landscape' and 'Automatic' options.
Drawing method (Standard (DIN), Ericsson or Afnor-like)
Folded package width (range 186 - 230 mm (7.3 – 9 inches) in steps of 1 mm;
default 210 mm (8.27 inches))
Folded package length (range 276 -310 mm (10.87 – 12.2 inches) in
increments of 1 mm; default: 297 mm (11.3 inches))
Binding edge (enabled or disabled; range 15 - 30 mm (0.59 – 1.18 inches) in
increments of 1 mm; default 20 mm (.79 inches))
Reinforcement (enabled or disabled)
Reinforce A4 (enabled or disabled)
Maximum number of copies on belt.
You can overrule the standard folding program with settings from the printer
driver or the scanner operating panel.
More information about Océ 9600 Plot Director and other printer drivers can
be found in the corresponding online help. The use of the Océ 9600 Copier
panel for making folding settings is described below.
See 'Finishing (group)' on page 165 for more information about defining
default folding settings.
Folder
By default, the standard folding settings defined for
269