Oce 9600 User Manual page 224

Use both hands to place the holder in the roll loader (see figure 105).
8
d
[105] Placing the new roll in the roll loader
Place the holder back in the roll compartment by returning the roll loader lever
9
to its upright position. The roll will now be loaded.
Caution:
the roll compartment.
Use both hands to slide the material under the metal paper guide until it makes
10
contact, as described in the procedure for loading rolls of print material.
Press the appropriate green button inside the roll compartment. The material
11
will automatically be fed into the machine.
You may also refer to the sticker inside the drawer.
Note:
Press the green button a second time to cut off the material protruding from the
12
paper path.
Remove the scrap material.
13
Return the roll loader lever to its starting position by pushing it to the left.
14
Close the paper roll compartment.
15
Press the on line button to put the system off line.
16
Specify the size and type of material on the operating panel.
17
Press the on line button again.
18
When you alter the size and/or media type, you have to adjust the settings
Note:
on the operating panel.
224 Océ 9600 Copier/Printer User Manual
Be careful when lifting the lever to avoid any possible damage to