Oce 9600 User Manual page 163

Custom print length
Description
Min/max values
Menu path
Default roll format
Description
Min/max values
Menu path
Default material
Description
Min/max values
Menu path
Key operator settings
The 'Default paper source number' option allows you to de-
termine the value on the Océ 9600 you can define a specific
cut length.
The specified cut length is used when the 'Custom' cut meth-
od is selected. If custom cut is enabled, the copy media
length will only depend on this setting, thus any other influ-
ence is excluded.
The minimum cut length is 279 mm.
11 – 590.55 in
Jobs - Print - Defaults - Sheet - Custom print length - <val-
ue> - Apply
Use 'Default roll format', to define the default media size for
your print jobs.
The default is A0.
The following sizes are available:
A0 to A4 (DIN range)
36 inch (E+)
ISO B1
ISO B2
Note: 'Default roll format' works only, when 'Auto format'
Off is selected in the Media section.
11 – 590.55 in
Jobs - Print - Defaults - Sheet - Default roll format - <value>
- Apply
Default material to use for incoming print jobs.
N/A
Jobs - Print - Defaults - Sheet - Default paper material - <val-
ue> - Apply
163