Oce 9600 User Manual page 159

Print error page (single option)
Description
Min/max values
Menu path
Number of prints/sets (single option)
Description
Min/max values
Menu path
Collate (single option)
Description
Min/max values
Menu path
Default print mode (single option)
Description
Key operator settings
Use this setting to have error pages printed in case a printing
error occurs.
Error pages are printed in the following environments: PDL,
RCF ticket or OJT ticket.
N/A
Jobs - Print - Print error pages - <value> - Apply
The 'Number of prints/sets' option allows you to define the
default number of prints for each job in the printer memory.
1 - 999
Jobs - Print - Defaults - Number of prints/sets - <value> - Ap-
ply
Specifies whether or not a number of originals should be pro-
cessed together as a set. If set processing is off, sorting is al-
ways done by page and every original will be presented as a
job. If set processing is on, sorting is done by page and all
originals will belong to the same job until the set is closed, or
sorting is done by set.
N/A
Jobs - Print - Defaults - Collate - <value> - Apply
With the print mode the printer Image Logic can be set in a
mode that matches the contents of the image. Setting the de-
fault print mode according to the main stream contents of the
print jobs will improve the quality of printed images. The de-
fault print mode setting is used when the Image Logic is not
able to automatically detect the appropriate print mode.
Select 'Poster' for images with dominating of gray areas.
Select 'Lines/Text' for scanned images.
Select 'Standard' otherwise.
159