Starting Up And Shutting Down The Scanner - Oce 9600 User Manual

Starting up and shutting down the scanner

TheOcé 9600 Copier can be started up and shut down with the on/off switch,
which is located on the scanner underneath the original feed table (see
figure 15).
The on/off switch has two settings:
on: the scanner is switched on
off: the scanner is switched off.
[15] On/off switch
Start up
Push the switch to the 'on' position.
1
The system is immediately available for work. The message 'Ready to copy'
appears.
Make certain the printer and controller are started as well.
Note:
Shut down
Push the switch to the 'off' position.
1
The scanner can be turned off while the printer is still working.
Note:
Using the Océ 9600 Copier 47