Off Line Folding - Oce 9600 User Manual

Off line folding

An important productivity feature provided by the Océ 9600 folder, is the
possibility to make off line folds. For off line folding the same settings can be
made as for normal folding. By default, the predefined settings in the Settings
Editor for off line folding are used. Polyester or transparent media cannot be
folded. This may result in a media jam.
Off-line folding settings
'Stacker' or 'Belt'
selected
'First fold only' selected
[169] Off-line folding settings
Use off line folding only for sheets which do not exceed a maximum
Note:
length of 6 m. If you try to fold a sheet longer than 6 m anyway, an error occurs.
Make off line folds
Switch the printer off line on the printer operating panel and wait for the printer
1
to finish the jobs that are already in the printer.
Watch the light on the top cover of the folder.
Note:
If this is off, the printer is on line and off line folding is not possible.
If this is blinking slowly, the printer is off line, but the folder is still
processing the last prints.
If this is blinking rapidly, an error has occurred.
If this is on, the printer is off line and you can feed in a sheet.
Also, refer to the sticker on the top cover of the folder.
Note:
Choose any settings for (off-line) folding on the printer operating panel.
2
If required, the key operator can change the default settings for
Note:
folding programs from the Settings Editor. See chapter 10, 'Key operator
settings' on page 129 for more information.
272 Océ 9600 Copier/Printer User Manual
Output length
=< 2.19 yd
2 m - 2.5 m (2 folds)
2 m - 2.5 m (3 folds)
> 2.73 yd
< 6.56 yd
Delivery
Delivered on stacker or belt
Delivered on stacker or belt
Stopped in second fold (possible
paper jam)
Unfolded, delivered in IRT
First fold only, delivered in first
fold delivery