Use Document
6.5.17
Overview of Communication Settings
Settings related to communication such as communication line for transmission and digital signature can be
specified.
6.5.18
Communication Settings - Line Settings
About Line Settings
Specifies settings for a fax sending line.
Overseas TX
Specifies a slow transmission speed to send a fax to an area in bad communication.
!
Detail
This is not used with the following functions.
Polling TX
Polling RX
Bulletin Board
ECM OFF
Cancels ECM mode to send data.
The ECM mode is an error request repeat method communication defined by ITU-T (International
Telecommunication Union). As Faxes equipped with the ECM mode communicate by checking if the sent
data has an error, they can prevent image blurring by the noise on the phone line. When there are a lot of
noises, communication time may be slightly longer than it is when ECM OFF is selected. This machine
automatically returns to the ECM ON status when it completes transmission.
!
Detail
Data is sent in the ECM mode unless ECM OFF is selected for this machime.
This is not used with the following functions.
Polling RX
Polling TX
V34 OFF
Bulletin Board Registration
Bulletin Board Polling RX
Océ cm3522/cm2522
6
6-45