Compaq TL891 - DLT Tape Library User Manual page 57

Operation 2-33
Write Protection
The write protection switch of a DLT tape cartridge is also shown in Figure 2-
43. To enable data recording, slide the write protect switch to the right so that
no orange color is visible through the window in the write protect switch (2).
To write protect the DLT tape cartridge, slide the write protect switch to the
left until the orange indicator shows through the window on the write protect
switch (3).
Barcode Labels
Barcode labels are included with the TL891 MiniLibrary and Expansion Unit.
Additional labels can be ordered (refer to Appendix B). The label slips into the
slot adjacent to the write-protect switch on each tape cartridge. The code used
may be Code 39, Codebar, 2-of-9, standard 2-of-5, or interleaved 2-of-5, with
a length of 8 digits. Minimum element width is 7.5 mm.
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM