Compaq TL891 - DLT Tape Library User Manual page 151

Table 6-2
Fault Symptom Codes
FSC
6043
6044
6045
6046
6047
6048
B001
B002
B004
B005
B006
B007
B010
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
continued
Message
Invalid Com Blk Type
Invalid Com Blk Type
Command Overlap
No Pkts To Send
Invalid Direction
Master Pkt ID Bad
Boot ROM CRC Error
Boot RAM Test Failed
Boot Comm Open Error
Boot Novram Error
Boot Unused Int
Flash Init Error
Boot UART 0 Error
Diagnostics and Troubleshooting 6-23
Description
A Slave inter-module process received
a packet from the Master inter-module
process, but the packet's CommBlock
type was invalid.
A Slave inter-module process received
a packet from the Status/Message
queue, but the packet's CommBlock
type was invalid.
A Slave inter-module process received
a Command from the Master inter-
module process, but a previously
issued command is still being
executed.
A Slave inter-module process has
been requested to send a packet to
the Master inter-module process, but
the Slave inter-module process has no
packets to send.
A Slave inter-module process has
received a direction control byte from
the Master inter-module process, but
the direction control byte is invalid.
continued