Compaq TL891 - DLT Tape Library User Manual page 142

6-14 TL891 MiniLibrary System User's Guide
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Table 6-2
Fault Symptom Codes
continued
FSC Message
3102 Picker Jammed
3103 Picker Jammed
3104 Picker Jammed
3105 Picker Jammed
3106 Picker Jammed
3107 Picker Jammed
3108 Picker Jammed
3109 Picker Jammed
310A Picker Jammed
Compaq Confidential – Need to Know Required
Description
While stowing to a bin, the picker
moved too far. This generally occurs if
the arm slips in between two
cartridges during the final push.
While stowing to a bin, the picker
moved too far. This generally occurs if
the arm slips in between two
cartridges during the final push.
During a bin stow, the picker did not
reach a position far enough to insure
that the cartridge was fully inserted.
The picker was not able to home
properly after stowing a cartridge to a
bin.
The picker was not able to position to
the cartridge notch while performing a
bin fetch operation.
During a bin fetch, the picker stalled
while attempting to pull a cartridge
into the shuttle.
The picker stalled while fetching from
a bin.
The picker was not able to position to
the cartridge notch while performing a
drive fetch operation.
During a drive fetch, the picker stalled
while attempting to pull a cartridge
into the shuttle.
continued