Compaq TL891 - DLT Tape Library User Manual page 180

E-4 TL891 MiniLibrary System User's Guide
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: l-appe Product Notes for IBM RS Last Saved On: 3/1/99 2:19 PM
The files that are created are:
Tape Drive Special File Characteristics
Special File Rewind-on-Close
Name
/dev/rmt* Yes
/dev/rmt*.1 No
/dev/rmt*.2 Yes
/dev/rmt*.3 No
/dev/rmt*.4 Yes
/dev/rmt*.5 No
/dev/rmt*.5 Yes
/dev/rmt*.7 No
NOTES:
1. The suggested values of density setting #1 and #2 are for compressed and
uncompressed format respectively. The only use of uncompressed format is if the
data is already compressed.
2. The density value can be useful in reading tapes on earlier TK85, TZ86, TZ87, and
TZ88 cartridges.
3. Compaq recommends changing the block size of the TZ89 DLT Cartridge SBB Tape
Drive or Tabletop Tape Drive to the maximum allowed by the operating system,
utility, or application. However, for some uses such as making bootable tapes or
transferring tapes between host systems, a value of 512 or 0 (variable size) may be
needed.
Compaq Confidential – Need to Know Required
Table E-2
Retention-on
Open
No Density Setting # 1
No Density Setting # 1
Yes Density Setting # 1
Yes Density Setting # 1
No Density Setting # 2
No Density Setting # 2
Yes Density Setting # 2
Yes Density Setting # 2
Bytes-per-Inch