Compaq TL891 - DLT Tape Library User Manual page 110

4-2 TL891 MiniLibary System User's Guider
Writer: Everett Godaire Project: TL891 MiniLibary System User's Guider Comments:
Part Number: ER-TL891-UA.A01 File Name: e-ch4 Configuration Last Saved On: 3/1/99 2:15 PM
(second line), and the number and locations of cartridges in the magazine
(fourth line).
DLT0 Active
DLT1 Idle
Loader Idle
0 1 2 _ 4 _ 6 7 8 9
Figure 4-1. Default Screen
1. At the Default Screen, press the Enter button. The Main Menu shown in
Figure 4-2 appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 4-2. Main Menu
2. Press the button three times to move the
press the Enter button. The display will show the Configure Submenu,
shown in Figure 4-3. The
there are additional configuration options that can be reached by
scrolling with the button.
Set Data Format
Set SCSI
Set Library Mode
Set Element Base
Figure 4-3. Configure Submenu
To select a configuration option, press the
control panel until the
want to change. In this case, let us choose Set Data Format. Press
the Enter button to display the choices for that option. If your
Base Module has two drives, the submenu shown in Figure 4-4
appears.
DLT0 Format
DLT1 Format
Figure 4-4. Drive Selection Submenu
Compaq Confidential – Need to Know Required
to Configure Menu, then
at the end of the fourth line means that
or
on the display is next to the option you
button on the