Compaq TL891 - DLT Tape Library User Manual page 141

Table 6-2
Fault Symptom Codes
FSC
3011
3012
3013
3014
3020
3021
3040
3042
3100
3101
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
continued
Message
Picker Retries Exceeded
Picker Retries Exceeded
Picker Retries Exceeded
Picker Retries Exceeded
Undefined Config
Wrong Codebase
Motor Firmware Error
Motor Firmware Error
Picker Jammed
Picker Jammed
Diagnostics and Troubleshooting 6-13
Description
While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
While stowing to a drive, the initial
push failed.
An unsupported configuration was
detected.
An attempt was made to flash the
incorrect firmware image into the unit.
Press Enter to Flash or ESC to cancel.
An undefined picker position was
specified.
An undefined door position was
specified.
The picker stalled during an inventory.
During a stow operation, the picker
was not able to insert the cartridge
into the bin.
continued