Compaq TL891 - DLT Tape Library User Manual page 146

6-18 TL891 MiniLibrary System User's Guide
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Table 6-2
Fault Symptom Codes
continued
FSC Message
5031 Bad Calendar Setting
5032 Bad Setting
5033 Set Density Failed
5034 Set Compression Failed
5035 DLT Timeout Error
5036 DLT Timeout Error
5037 DLT Set Bus ID Error
5038
SCSI Lock Overrides
5039 Invalid Unlock Code
503A Auto Cleaning
Compaq Confidential – Need to Know Required
Description
A time or date setting obtained from
the Real Time Clock, which was
indicated as being "running",
nevertheless was determined to be
invalid.
A default setting was determined to be
invalid.
User has chosen the DLT Density
menu selection, but the chosen DLT
has failed to successfully execute the
density change request.
User has chosen the DLT Compression
menu selection, but the chosen DLT
has failed to successfully execute the
compression mode change request.
Drive communication error during a
menu operation.
Drive communication error during a
menu operation.
Error returned from drive when trying
to set a SCSI ID with the configure
menu.
Display message only if an attempt is
made to remove a magazine while a
Prevent Medium removal is in effect.
Display message only when an invalid
unlock code is entered..
Display message only -not an error.
continued