Compaq TL891 - DLT Tape Library User Manual page 30

2-6 TL891 MiniLibrary System User's Guide
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM
the button. Table 2-1 describes the effect of each of the four buttons
Enter
under various conditions.
The three most important things you need to know about the buttons are:
1. To enter the Menu Mode and display the Main Menu from the Default
Screen, press the
Enter
2. To return to the Main Menu from a submenu, press the
repeatedly until the Main Menu appears. Pressing the
while the Main Menu is displayed exits the Menu Mode and returns you
to the Default Screen. The Default Screen is shown in Figure 2-6; the
Main Menu is shown in Figure 2-10.
3. To display the Show Status Menu only without entering the Menu
Mode, press the
Escape
remains online.
NOTE: When you enter the Menu Mode at the Expansion Unit, the Ready light on
that module goes out. This means that the MiniLibrary system is off-line, and the
system responds to all commands from the host with a SCSI 'Not Ready' until you
exit the Menu Mode and the Ready light goes on. When you enter the Menu Mode
at any of the Base Modules, the Ready light on that module goes out. This means
that the individual module is off-line, and the system responds to all commands
from the host pertaining to that module with a SCSI 'Not Ready' until you exit the
Menu Mode and the Ready light goes on.
Compaq Confidential – Need to Know Required
button.
button at the Default Screen. The system
button
Escape
button
Escape