Compaq TL891 - DLT Tape Library User Manual page 176

D-8 TL891 MiniLibrary System User's Guide
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: k-appd Product Notes for Sun Last Saved On: 3/1/99 2:18 PM
The installation and verification procedure is now complete.
Dump Parameters for the Tape Drive
The parameters that should be used when running the ufsdump utility with
the tape drive are as follows:
density (d) = 85937 (BPI)
blocking factor = 126
Example,
The following parameter is an example of how to back up the entire disk
partition (/dev/rdsk/c0t3d0s6) onto the tape drive:
ufsdump 0dbf 85937 126 /dev/rst4/dev/rdsk/c0t3d0s6
Compaq Confidential – Need to Know Required