Compaq TL891 - DLT Tape Library User Manual page 115

The Library Mode options are:
For a Single-Drive TL891 -
Y
Random
Y
Sequential DLT0
For a Two-Drive TL891 -
Y
Random
Y
Sequential DLT0
Y
Sequential DLT1
Y
Sequential Split
Press the button to display the desired Sequential option and select it by
pressing . The Sequential Mode options Normal and Recirculate will
Enter
appear. To select Normal which is the default (and recommended) setting,
press .
Enter
5. To set the TUR Reporting option - press the
level to the Configure Submenu (Figure 4-9) and use the
move the to Set Special Config (11
Enter .
Set Data Format
Set SCSI
Set Library Mode
Set Element Base
Figure 4-9. Configure Submenu
The Special Config Submenu shown in Figure 4-10 appears:
Mode Pg 1F Length
* Short (0x0E)
Model Number
* Compaq TL89X
Figure 4-10. Special Config Submenu
Press twice to position the
to move down one line to *Standard. Use the
Enter
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibary System User's Guider Comments:
Part Number: ER-TL891-UA.A01 File Name: e-ch4 Configuration Last Saved On: 3/1/99 2:15 PM
Escape key to move up one
th
menu item from top) and press
next to the TUR Reporting option. Press
Configuration 4-7
arrow to
to change to