Compaq TL891 - DLT Tape Library User Manual page 147

Table 6-2
Fault Symptom Codes
FSC
5090
6001
6002
6003
6004
6005
6006
6007
6010
6011
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
continued
Message
Slave Command Failure
Comm Open Error
Comm Port Send Error
Comm Port Recv Error
EnQ Without IDs
DeQ Without Ids
EnQ Null Pointer
No Free Comm Blks
Pkt Send Error
Pkt Receive Error
Diagnostics and Troubleshooting 6-19
Description
Error occurred sending a menu mode
command to a slave module.
An attempt to open the RS-232 serial
communication port used by the inter-
module processes failed.
An inter-module process (Master or
Slave) was sending a packet to a
remote module, but the UART detected
an error condition during the transfer.
An inter-module process (Master or
Slave) was receiving a packet from a
remote module, but the UART detected
an error condition during the transfer.
The Master inter-module process has
repeatedly attempted to send a packet
to a Slave inter-module process, but
all retries have been exhausted before
the packet could be successfully sent.
The Master inter-module process has
repeatedly attempted to receive a
packet from a Slave inter-module
process, but all retries have been
exhausted before the packet could be
successfully received.
continued