Displaying And Maintaining Isolate-User-Vlan - HP 6125G Configuration Manual

Step
8. Configure the uplink port for
the isolate-user-VLAN.
9. Return to system view.
10. Configure a downlink port for
the isolate-user-VLAN.
11. Return to system view.

Displaying and maintaining isolate-user-VLAN

Task
Display the mapping between an
isolate-user-VLAN and its secondary
VLANs.
Command
a. Enter Layer 2 Ethernet or
aggregate interface view:
interface interface-type
interface-number
Or
interface
bridge-aggregation
interface-number
b. Configure the port to
operate in promiscuous
mode in a specific VLAN:
port isolate-user-vlan
vlan-id promiscuous
quit
a. Enter Layer 2 Ethernet or
aggregate interface view:
interface interface-type
interface-number
Or
interface
bridge-aggregation
interface-number
b. Configure the link type of
the port:
port link-type { access |
hybrid | trunk }
c. Assign the downlink port
to the secondary VLAN
according to its link type:
port access vlan vlan-id
Or
port hybrid vlan vlan-list
{ tagged | untagged }
Or
port trunk permit vlan
{ vlan-list | all }
d. Configure the port to
operate in host mode:
port isolate-user-vlan host
quit
Command
display isolate-user-vlan
[ isolate-user-vlan-id ] [ | { begin |
exclude | include } regular-expression ]
127
Remarks
By default, a port does not operate
in promiscuous mode or host mode
in a VLAN.
N/A
By default, a port does not operate
in host mode or promiscuous
mode.
N/A
Remarks
Available in any view