HP 6125G Configuration Manual page 122

Step
1. Enter system view.
2. Associate a specific MAC
address with a VLAN.
3. Enter Layer 2 Ethernet
interface view.
4. Configure the link type of
the ports as hybrid.
5. Configure the hybrid
ports to permit packets
from specific MAC-based
VLANs to pass through.
6. Enable the MAC-based
VLAN feature.
7. Configure VLAN
matching precedence.
To configure dynamic MAC-based VLAN assignment:
Step
1. Enter system view.
2. Associate MAC
addresses with a VLAN.
3. Enter Ethernet interface
view.
4. Configure the link type of
the port as hybrid.
5. Enable the MAC-based
VLAN feature.
Command
system-view
mac-vlan mac-address
mac-address [ mask
mac-mask ] vlan vlan-id
[ priority priority ]
interface interface-type
interface-number
port link-type hybrid
port hybrid vlan vlan-list
{ tagged | untagged }
mac-vlan enable
vlan precedence { mac-vlan |
ip-subnet-vlan }
Command
system-view
mac-vlan mac-address mac-address
vlan vlan-id [ priority priority ]
interface interface-type
interface-number
port link-type hybrid
mac-vlan enable
113
Remarks
N/A
N/A
N/A
By default, all ports are access ports.
By default, a hybrid port only permits the
packets from VLAN 1 to pass through.
Disabled by default.
Optional.
By default, VLANs are preferably matched
based on MAC addresses.
Remarks
N/A
With dynamic MAC-based VLAN
assignment enabled, a port is
automatically assigned to the VLAN
in the MAC address-to-VLAN entry
that is exactly matched by the source
MAC address of the packet received
on the port.
N/A
By default, all ports are access ports.
Disabled by default.