Displaying And Maintaining Isolate-User-Vlan - HP 5820X series Configuration Manual

Step
9. Configure the uplink port
for the isolate-user-VLAN.
10. Return to system view.
11. Configure a downlink port
for the isolate-user-VLAN.
12. Return to system view.

Displaying and maintaining isolate-user-VLAN

To do...
Display the mapping between an
isolate-user-VLAN and its secondary
VLANs and information about these
VLANs
Command
Enter Layer 2 Ethernet or aggregate
interface view:
interface interface-type interface-
number
Or
interface bridge-aggregation
interface-number
Configure the port to operate in
promiscuous mode in a specific
VLAN:
port isolate-user-vlan vlan-id
promiscuous
quit
Enter Layer 2 Ethernet or aggregate
interface view:
interface interface-type interface-
number
Or
interface bridge-aggregation
interface-number
Configure the link type of the port:
port link-type { access | hybrid |
trunk }
Assign the downlink port to the
secondary VLAN according to its link
type:
port access vlan vlan-id
Or
port hybrid vlan vlan-list { tagged |
untagged }
Or
port trunk permit vlan { vlan-list |
all }
Configure the port to operate in host
mode:
port isolate-user-vlan host
quit
Use the command...
display isolate-user-vlan [ isolate-user-
vlan-id ] [ | { begin | exclude |
include } regular-expression ]
134
Remarks
By default, a port does not
operate in promiscuous mode or
host mode in a VLAN.
N/A
By default, a port does not
operate in host mode or
promiscuous mode.
N/A
Remarks
Available in any view