Configuring VLAN mapping
Overview
VLAN mapping re-marks VLAN tagged traffic with new VLAN IDs. HP provides the following types of
VLAN mapping:
One-to-one VLAN mapping—Replaces one VLAN tag with another. You can use one-to-one VLAN
•
mapping to sub-classify traffic from a particular VLAN for granular QoS control.
One-to-two VLAN mapping—Tags single-tagged packets with an outer VLAN tag. One-to-two
•
VLAN mapping expands the VLAN tag space, and enables a service provider and its customers to
assign VLANs independently without the risk of VLAN assignment conflicts.
Two-to-two VLAN mapping—Replaces the outer and inner VLAN IDs of double tagged traffic with
•
a new pair of VLAN IDs. You can use two-to-two VLAN mapping to enable two remote sites in
different VLANs to communicate at Layer 2 across two service provider networks that use different
VLAN assignment schemes.
Application scenario of one-to-one VLAN mapping
Figure 56
shows a typical application scenario in which each home gateway uses different VLANs to
transmit the PC, VoD, and VoIP services.
174