Configuration Procedure; Displaying And Maintaining Voice Vlan - HP 6125G Configuration Manual

To make voice VLAN take effect on a port that is enabled with voice VLAN and operates in manual
•
voice VLAN assignment mode, you must assign the port to the voice VLAN manually.

Configuration procedure

To set a port to operate in manual voice VLAN assignment mode:
Step
1. Enter system view.
2. Enable the voice VLAN
security mode.
3. Add a recognizable OUI
address.
4. Enter interface view.
5. Configure the port to operate
in manual voice VLAN
assignment mode.
6. Assign the access, trunk, or
hybrid port in manual voice
VLAN assignment mode to the
voice VLAN.
7. Configure the voice VLAN as
the PVID of the trunk or hybrid
port.
8. Enable voice VLAN on the
port.

Displaying and maintaining voice VLAN

Task
Display the voice VLAN state.
Display the OUI addresses that the
system supports.
Command
system-view
voice vlan security enable
voice vlan mac-address oui mask
oui-mask [ description text ]
interface interface-type
interface-number
undo voice vlan mode auto
For the configuration procedure,
see "Configuring VLANs."
For the configuration procedure,
see "Configuring VLANs."
voice vlan vlan-id enable
Command
display voice vlan state [ | { begin | exclude |
include } regular-expression ]
display voice vlan oui [ | { begin | exclude |
include } regular-expression ]
137
Remarks
N/A
Optional.
By default, the voice VLAN security
mode is enabled.
Optional.
By default, each voice VLAN has
default OUI addresses configured.
For the default OUI addresses of
different vendors, see Table
N/A
By default, the manual voice VLAN
assignment mode is disabled.
After you assign an access port to
the voice VLAN, the voice VLAN
becomes the PVID of the port
automatically.
Optional.
This operation is required for
untagged inbound voice traffic
and prohibited for tagged inbound
voice traffic.
Disabled by default.
Remarks
Available in any view
Available in any view
14.