Associating Secondary Vlans With An Isolate-User-Vlan; Displaying And Maintaining Isolate-User-Vlan - HP A5120 EI Series Configuration Manual

To do...
Create a secondary VLAN interface
and enter secondary VLAN interface
view

Associating secondary VLANs with an isolate-user-VLAN

Follow these steps to associate secondary VLANs with an isolate-user-VLAN:
To do...
Enter system view
Associate the specified
secondary VLANs with the
specified isolate-user-VLAN
NOTE:
After associating an isolate-user-VLAN with the specified secondary VLANs, you cannot perform any of
the following operations:

Adding or removing an access port to or from an involved VLAN.

Deleting an involved VLAN.

Isolating ports in the same secondary VLAN at Layer 2.

Changing the isolate-user-VLAN type of a port.
To perform the preceding configurations, cancel the association first.

Displaying and maintaining isolate-user-VLAN

To do...
Display the mapping between an
isolate-user-VLAN and its secondary
VLANs and information about these
VLANs
Use the command...
interface vlan-interface vlan-
interface-id
Use the command...
system-view
isolate-user-vlan isolate-user-vlan-id secondary
secondary-vlan-id [ to secondary-vlan-id ]
Use the command...
display isolate-user-vlan [ isolate-user-
vlan-id ] [ | { begin | exclude | include
} regular-expression ]
128
Remarks

This configuration is required
when users in the isolate-user-
VLAN need to communicate
with other networks at Layer
3.

This configuration is optional
when users in the isolate-user-
VLAN do not need to
communicate with other
networks at Layer 3.
The vlan-interface-id argument
must take the secondary VLAN
ID.
Remarks
—
Required
Remarks
Available in any view