Configuring Layer 2 Forwarding; Configuring Cut-Through Forwarding - HP 6125G Configuration Manual

Configuring Layer 2 forwarding

Configuring cut-through forwarding

A cut-through forwarding-enabled device forwards a frame after it receives the first 64 bytes of the frame,
thus improving forwarding performance.
Cut-through forwarding does not affect cyclic redundancy code (CRC) checks, and thus CRC-error frames
will not be forwarded.
To configure cut-through forwarding:
Step
1. Enter system view.
2. Enable
forwarding.
Command
system-view
cut-through
cut-through enable
216
Remarks
N/A
Disabled by default.