Configuring A Downlink Policy For The Customer-Side Port - HP 6125G Configuration Manual

Step
2. Create a class and enter class
view.
3. Specify a foreign CVLAN as a
match criterion.
4. Specify a local SVLAN as a match
criterion.
5. Return to system view.
6. Create a traffic behavior and enter
traffic behavior view.
7. Configure a CVLAN marking
action to replace the foreign
CVLAN ID with a local CVLAN ID.
8. Return to system view.
9. Create a QoS policy and enter
QoS policy view.
10. Associate the class with the
behavior.
NOTE:
If you do not need to replace the CVLAN tags, skip these steps.

Configuring a downlink policy for the customer-side port

The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
To configure a downlink policy for the customer-side port:
Step
1. Enter system view.
2. Create a class and enter class view.
3. Specify a local CVLAN as a match
criterion.
4. Specify a local SVLAN as a match
criterion.
5. Return to system view.
6. Create a traffic behavior and enter
traffic behavior view.
7. Configure a CVLAN marking
action to replace the local CVLAN
ID with a foreign CVLAN ID.
8. Configure an SVLAN marking
action to replace the local SVLAN
ID with a foreign SVLAN ID.
9. Return to system view.
Command
traffic classifier tcl-name
[ operator and ]
if-match customer-vlan-id vlan-id
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Command
system-view
traffic classifier tcl-name
[ operator and ]
if-match customer-vlan-id vlan-id
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
remark service-vlan-id vlan-id
quit
185
Remarks
Repeat these steps to create
one class for each local SVLAN
and foreign CVLAN pair.
Repeat these steps to configure
one CVLAN marking action for
each local SVLAN and foreign
CVLAN pair.
N/A
Repeat this step to create other
class-behavior associations.
Remarks
N/A
Repeat these steps to create
one class for each local
CVLAN and SVLAN pair.
Repeat these steps to create
one VLAN marking behavior
for each local CVLAN and
SVLAN pair.