12.5
Header Bar
The Header Bar on the graphic display panel displays three system parameters: the System Load, Cur-
rent Status, and System Time.
No.
1
System Load - Load per each phase as percent of full load. Low - Less than 10% Load.
Current Status - UPS status at the moment. (Status is delayed by a few seconds)
2
3
System Time - Current time in AM-PM format
12.6
Footer Bar
The Footer Bar on the graphic display panel displays three system parameters:
No.
1
Fault - Displays last fault sensed by UPS. A Fault causes the UPS to switch to bypass
and it will not automatically reset.
2
Warning - Displays last warning sensed by UPS. Multiple frequent warnings of the same
type may induce a fault condition.
3
UPS Mode - Selected operating mode.
4300 Series Installation and Operation Manual
1
2
Header Bar Components
FIGURE 12.4 – HEADER BAR DISPLAY COMPONENTS
UPSOL
INVOL
1
2
Footer Bar Components
FIGURE 12.5 – FOOTER BAR DISPLAY COMPONENTS
3
Function
BYPASS
3
Function
37