Toshiba 4300 series Installation And Operation Manual page 67

EE2RAER EEPROM to ROM loading error.
FIBYER Input/Bypass Frequency Error –
Input frequency outside of UPS
specifications.
INVOL Inverter overload.
MCCBTRP UPS input MCCB tripped open.
NOCOM No communication between main
controller and display.
OL110 Overload – UPS is overloaded
(110% and above) Unit will
switch to bypass operation or
shut down if no action is taken.
REYDNER RemotEye III Downlink error
(main and communication error).
REYE- RemotEye III Uplink error.
UPER
RO2EEER ROM to EE error.
SOH System overheat.
SRV- RS-232 service port error.
232ER
STFAIL System test failed.
VBNG Battery voltage is not good.
VBLO Battery Voltage low.
VBSD Battery voltage reached shut-
down level.
VBYOV Bypass overvoltage.
VBYUV Bypass under voltage.
VIOV Input Overvoltage – Input voltage
exceeds UPS specifications.
VIUV Input Undervoltage – Input volt-
age less than UPS specifications.
4300 Series Installation and Operation Manual
Contact the nearest Toshiba authorized representa-
tive for service.
Depends on UPS mode.
Shutdown excess load equipment to reduce load.
Contact the nearest Toshiba authorized representa-
tive for service.
Shut down excess equipment to reduce load.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Contact the nearest Toshiba authorized representa-
tive for service.
Battery backup is xx% depleted.
Battery backup is exhausted. UPS will shut down
until utility power is restored.
Restore On-Line operation as soon as possible.
Restore On-Line operation as soon as possible.
Depends on UPS mode.
Depends on UPS mode.
59