Bang & Olufsen BeoVision 7 Reference Book page 71

SPEAKER LEVEL
SEQUENCE AUTOMATIC
LEFT FRONT . . . . . . . .
RIGHT FRONT . . . . . . . .
RIGHT REAR . . . . . . . .
LEFT REAR . . . . . . . .
store
What's on the SPEAKER LEVEL menu ...
LEFT FRONT ... Adjusts the sound level from your
left front speaker.
RIGHT FRONT ... Adjusts the sound level from
your right front speaker.
RIGHT REAR ... Adjusts the sound level from your
right rear speaker.
LEFT REAR ... Adjusts the sound level from your
left rear speaker.
... the two sound sequence options
AUTOMATIC ... If you select the automatic
sequence, the sound shifts automatically between
the external speakers every 2–3 seconds. To
adjust the speaker levels you must move the
cursor to the speaker you want to adjust first.
MANUAL ... If you select the manual sequence, the
sound follows the speaker you highlight on the
menu. You can then adjust the sound accordingly.
When the cursor is placed on SEQUENCE you
hear sound in the centre speaker.
MONO / STEREO
GO
What's on the SOUND SYSTEM menu ...
Sound systems that can appear in the menu are:
DOLBY 3 STEREO, DOLBY PRO LOGIC, DOLBY
DIGITAL, DOLBY D + PRO LOGIC, DTS DIGITAL
SURROUND, MONO/STEREO.
This menu is only available if speakers are
connected in a surround sound system.
SOUND SYSTEM
accept
GO
The A–B repeat function allows you to specify two
Play Mode
A-B Repeat A (Start Point)
Repeat B (End Point)
Random Off
Search Mode
What's on the A–B Repeat menu ...
points on a disc that form a loop to be played over
and over.
When you select the start or end point in the menu,
the current playback point is stored.
Select Off when you no longer wish to repeat
playback of the selected section of the disc.
71