Bang & Olufsen BeoVision 7 Reference Book page 40

40
If you connect additional video
equipment to your television, you
must register the equipment in the
CONNECTIONS menu.
When the system is first set up, the
equipment connected at that
particular moment is detected by the
television, and the CONNECTIONS
menu appears automatically on the
screen. If you connect equipment at
a later date, on a permanent basis,
then you must register this
equipment in the CONNECTIONS
menu.
For information about where and
how to connect extra equipment,
refer to the previous pages and the
chapter 'Socket panels' on page 32.
Register additional video equipment
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
CONNECTIONS
SOUND
CONNECTIONS
SOUND
PICTURE
PICTURE
CLOCK
BEOLINK
select
GO
MENU LANGUAGE
AV1
AV2
CONNECTIONS
AV1
AV2
AV3
AV4
CAMERA
PROJECTOR
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
> Press GO to bring up the OPTIONS menu.
CONNECTIONS is highlighted already.
> Press GO to call up the CONNECTIONS menu.
OPTIONS
> Press or
socket groups: AV1, AV2, AV3, AV4, CAMERA
and PROJECTOR.
> Press GO to be able to register a connected
product to the highlighted socket group.
> Press or
the group.
> Press or
select
GO
connected to the highlighted socket.
> Press GO to be able to select another socket
group.
V.MEM
> When you have completed your settings, press
NONE
STOP to back up through previous menus or
NONE
NONE press EXIT to exit all menus directly.
NONE
NONE
select
GO
to highlight OPTIONS.
to step between the different
to move between the sockets in
to register what you have