Bang & Olufsen BeoVision 7 Reference Book page 15

Store all programs and settings
When you have selected the menu language,
a menu for program tuning automatically
appears on the screen.
AUTO TUNE
CHECK AERIAL CONNECTION
TV
start
When the menu for auto tuning appears, the
prompt CHECK AERIAL CONNECTION appears to
remind you to check that your TV aerial is properly
connected.
> Press GO to start auto tuning. The television
tunes in all available programs.
Determine the centre position
If your television is equipped with the optional
motorised stand, the STAND ADJUSTMENT
menu appears on the screen. Once the centre
position is determined, select your favourite
positions for when the television is switched
on and in standby.
CENTRE POSITION
GO
Make sure that there is enough room for the
television to turn to the right and left.
For further information about stand positions,
refer to the chapter 'Set positions for the
television to turn to' on page 22.
STAND ADJUSTMENT
CALIBRATING . . .
adjust
GO
When the STAND ADJUSTMENT menu
appears ...
> Press GO to start stand adjustment.
> If the adjustment is interrupted the text
'ADJUSTMENT FAILED' appears on the screen.
Remove obstacles preventing the television
from turning, and press GO to start adjustment
again.
> Once adjustment is complete, the text
'ADJUSTMENT OK' appears, followed by the
STAND POSITIONS menu.
> Move between the different stand positions;
VIDEO, AUDIO and STANDBY by means of
and and press GO to enter the menu.
> To turn and possibly tilt the television, press
or and or .
> Press the green button to store each of the
positions.
15