Bang & Olufsen BeoVision 7 Reference Book page 41

When you have connected additional video
equipment to your television, you must also
'tell' the system if you have made additional
connections, such as connecting a digital
sound input, a digital video signal or an IR
transmitter.
If you connect, for example, a BeoCord V 8000
or a HDR 1 and connect a set-top box to it, the
menu item APPEND SOURCE appears in the
AV1 menu, there you select STB and you must
then select which box you have connected.
For further information about the
CONNECTIONS menu, refer to the chapter
'On-screen menus' on page 60.
STB SETUP
NOKIA 96025
NOKIA 9820T
NOKIA 9850T
PACE DTR730-IM
SKY DIGITAL
SELECTOR
CANALdig DK/S/N
MACAB DCB-101
TPS 96573D
CANAL + SAT r2
Planet PL 9000
CANALdigital I
ECHOSTAR 9000
CANALdigital E
TV BOX 1000-S
CANALdigital NL
NOKIA D-BOX
NOKIA D-BOX II
HUMAX F1-VACI
TechniBox CAM1
store
If you have connected a set-top box, you will be
prompted to select your set-top box from an on-
screen list when you select STB in the
CONNECTIONS menu.
If, for some reason, you disconnect the extra
equipment and then disconnect the television from
the mains, you may have to register the equipment
again upon reconnection, even if you have not
changed your setup of extra equipment.
GO
41