Bang & Olufsen BeoVision 7 Reference Book page 63

TV AUTO TUNING
1 . . . . . . . .
DELETES PROGRAM GROUPS
start
What's on the AUTO TUNING menu ...
The AUTO TUNING function is automatic. When
tuning of all programs is complete, the EDIT
PROGRAMS menu appears.
TV MANUAL TUNING
SEARCH . . .
FREQUENCY 210
PROGRAM NUMBER 1
NAME DR1
EXTRA
start
store
What's on the TV MANUAL TUNING menu ...
SEARCH ... Start search tuning.
FREQUENCY ... Select a frequency to tune in.
PROGRAM NUMBER ... Store or change program
number. You can store 99 programs.
NAME ... Access the naming menu and name the
program you have selected.
EXTRA ... Access the extra TV MANUAL TUNING
menu.
FINE TUNE
DECODER
TV SYSTEM
SOUND
GO
What's on the extra TV MANUAL TUNING
menu ...
FINE TUNE ... Fine tune the frequency of a
program or tuned program. You can fine tune
within the range of -8 – +8.
(DECODER) ... A decoder is necessary for the
reception of coded programs. Usually the
decoder is detected automatically during tuning,
but it can be selected via this menu option. Set
DECODER to one of following options: ON (for
decoder on) or OFF (for no decoder).
(TV SYSTEM) ... TV broadcast system – this option
is only available on certain types of TV sets, as
the TV broadcast system is usually selected
automatically.
SOUND (mono, stereo or language) ... Several
types of sound may be available for different
programs, mono, stereo or different languages.
On the relevant program or frequency select the
options MONO (FM / NICAM mono sound),
STEREO (NICAM / A2 stereo sound), MONO1
(mono language 1), MONO2 (mono language 2),
MONO3 (mono language 3), or STEREO2 (stereo
language 2).
Even though you store a type of sound/language,
you can switch between the various types while
watching a TV programme. For further information,
refer to the chapter 'Surround sound and Home
cinema' on page 10 in the Guide.
63
TV MANUAL TUNING
0
OFF
B / G
STEREO
accept
GO