Connect Speakers - Bang & Olufsen BeoVision 7 Reference Book

Connect speakers

Connect Bang & Olufsen speakers and a
BeoLab 2 subwoofer to the connection panel
at the back of the television. The speakers
must be Bang & Olufsen Power Link speakers.
To connect speakers ...
> Use the cables enclosed with the speakers.
> Connect the two front speakers to the sockets
marked FRONT.
> Connect the two rear speakers to the sockets
marked REAR.
> Connect the subwoofer to the socket marked
SUBWOOFER.
You can loop the signals from speaker to speaker
(as described in the Guide enclosed with your
speakers), or you can connect each speaker to a
socket. Longer cables and adaptors are available
from your Bang & Olufsen retailer.
Remember to set the L – R – LINE switch on both
the front and rear set of speakers to L or R (left
and right channel) to indicate their position in
each set. Set the left speakers to L and the right
speakers to R.
SPEAKER TYPE
CENTRE BEOLAB 7-2
CONFIGURATION SINGLE
FRONT BEOLAB 8000
REAR BEOLAB 8000
SUBWOOFER YES
EXT. CENTRE BEOLAB 7-4
CONFIGURATION SINGLE
store
GO
L
FRONT
SUBWOOFER
L
REAR
> Press MENU to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press to highlight SOUND.
> Press GO to bring up the SOUND SETUP menu
and press to highlight SPEAKER TYPE.
> Press GO to bring up the SPEAKER TYPE menu.
> Press or to reveal your speaker type and
move on to the next speaker set or
configuration. Choose NONE if no speakers are
connected.
> If you have a BeoLab 2 subwoofer, press
move the cursor to SUBWOOFER and press
change the field to YES.
> Press GO to store or EXIT to leave the menu
without storing.
43
R
R
to
to
to