Bang & Olufsen BeoVision 7 Reference Book page 11

Insert a tape for recording ...
> Find the teletext page you want.
> Press RECORD to be able to select a programme
to record, or use to move to REC on the teletext
menu bar and press GO.
> Press or to move to the start time or the
actual programme title.
> Press GO to select the chosen start time or
simply select the programme title.
> If necessary, press GO to select the stop time,
you can change the stop time by pressing
and include two or three programmes in a row.
> Check the status line for the recording, if
necessary use or or the number buttons to
change and or to move between the
entered data.
> Press GO to store the timed recording.
PROGRAMMING STORED indicates that your
recording is stored.
You can also bring up the menu for making a
Timer recording via the main SETUP menu for the
relevant source, such as TV.
If the PDC/VPS option is set to ON in the
BeoCord V 8000 OPTIONS menu, you do not have
to select start and stop times for your recording,
but only the programme name on the teletext
page.
Record via on-screen menu
When you use the on-screen menu to
program a timed recording, remember to
first switch to the source (such as TV) you
wish to record.
TV RECORD
NOW
TELETEXT
RECORD LIST
MENU
PROGRAM
PROGRAM
START TIME
START TIME
STOP TIME
STOP TIME
DATE
select
GO
PDC / VPS
Insert a tape ready for recording ...
> Press TV to switch on the television or DTV to
switch on a set-top box, if available.
> Press RECORD on Beo4 to bring up the
recording menu.
TV RECORD
> Press until MENU is highlighted.
18 BBC
> Press GO to bring up the menu for setting a
15:40
timed recording. START TIME is highlighted.
16:40
> Use the number buttons or
7 MAY
information for your timed recording; stop time,
OFF
date, different program number if necessary,
store
GO
and activate the PDC/VPS function if available.
> Press or
> Press GO to store the recording.
> Press STOP to back up through previous menus
or press EXIT to exit all menus directly.
If PDC/VPS is an option on the menu, then you can
set it to OFF or AUTO. The option you choose will be
valid for this particular recording only. For further
information about the PDC and VPS systems and
recording, refer to the BeoCord V 8000 Guide.
or to enter
to step from option to option.
11