Bang & Olufsen BeoVision 7 Reference Book page 52

52
The BeoLink system makes it possible
to distribute picture and/or sound to
other rooms throughout the house.
For example, you can connect your
television in the living room to
another video system or set of
speakers in another room, thereby
making it possible to 'move' the
picture or sound to other rooms.
If you have a BeoLink distribution
system installed, you can either use
your television in the main room,
such as a living room, or in a link
room, such as a study or bedroom.
Under certain circumstances, it may
be necessary to enter modulator
settings.
Distribute sound and picture with BeoLink
Link connections
TV IN
RF Link
Amplifier
The main room system must be connected to
the link room system with a Master Link
cable:
> Connect the Master Link cable to the socket
marked MASTER LINK on the television.
> If you want to distribute video signals as well,
connect an ordinary aerial cable to the socket
marked LINK TV OUT on the television. Then
run the aerial cable to the RF Link Amplifier and
the Master Link cable to the link room. Follow
the instructions enclosed with the link room
equipment.
NOTE! Groups made on a television in a main
room cannot be accessed from a link room
television.
To the MASTER LINK socket on the link
room system
MASTER
LINK
LINK TV
OUT
Video signal distribution to link rooms
If an audio system is already connected to the
Master Link socket and you wish to connect more
equipment, the Master Link cable must be split in
two and joined with the cable from the link room
using a special junction box. Contact your Bang &
Olufsen retailer for assistance.
Digital audio and video signals cannot be
distributed from a main room television to the link
room system.