Bang & Olufsen BeoVision 7 Reference Book page 68

68
CAMERA
SOURCE
AUDIO SOCKET
IR SOCKET
HDTV
What's on the CAMERA menu ...
SOURCE ... Select the source you have connected
to the CAMERA socket. Options are:
NONE ... Select this option if nothing is
connected.
STB(V.AUX) ... Select this option if you have
connected a set-top box. The set-top box can
then be activated by means of V.AUX on Beo4.
PC... Select this option if you have connected a
PC to this socket. REMEMBER to switch off all
equipment before connecting the PC – See
page 33. PC can then be activated by means of
PC on Beo4.
CAMERA ... Select this option if you have
connected a digital camera (or a Camcorder).
The camera can then be activated by means of
CAMERA on Beo4.
HDTV ... If the source connected to this AV socket
delivers HDTV, select which socket is used for
HDTV; Options are: YPbPr or NO.
NOTE! If your television is equipped with the HD-
ready feature, a third option for the menu item
'HDTV' is available. This option is 'DVI-I'.
>> On-screen menus
CAMERA
NONE
NONE
NONE
store
GO
What's on the PROJECTOR menu ...
TYPE ... Select which type of projector is
connected.
IR SOCKET ... Select which IR OUT socket you
have used for the connected projector. Options
are: C1, C2, C3 and C4.
PROJECTOR
TYPE SELECT
IR SOCKET C4
store
GO
PICTURE
BRIGHTNESS . . . . . . . .
CONTRAST . . . . . . . .
COLOUR . . . . . . . .
store
What's on the PICTURE menu ...
BRIGHTNESS ... Adjusts the picture brightness.
CONTRAST ... Adjusts the contrast level in the
picture.
COLOUR ... Adjusts the colour intensity in the
picture.
For video sources using the NTSC signal, a fourth
option – Tint (colour shade or nuance) – will be
available for adjustment.
GO