Bang & Olufsen BeoVision 7 Reference Book page 31

Connect headphones and listen to a
TV programme, or connect a camera
and see the pictures on the television
screen, or connect a Camcorder and
watch your home movies on the
television.
Camera and headphones sockets
Watch digital pictures on your
television
To watch your camera pictures, connect the
camera and switch the television on. The
television automatically registers the signal
and you can see the still pictures on the
screen.
If the signal from the camera is switched
off ...
> Press LIST repeatedly to display CAMERA on
Beo4 and press GO.
In order to display CAMERA on Beo4, you must
first add it to the Beo4 list of functions. For further
information, refer to the chapter 'Customise Beo4'
on page 58.
Watch and copy from a Camcorder
If you have connected a video tape recorder,
such as a BeoCord V 8000, to your television,
and you connect your Camcorder, you can
copy Camcorder recordings onto a videotape.
To copy a recording from a Camcorder ...
> Connect your Camcorder and start playback on
the Camcorder. The television automatically
registers the signal and you can see the pictures
on the television screen.
> Press RECORD twice to start recording.
L
R
VIDEO
PHONES
Sockets for temporary connections
L – R – VIDEO
These sockets are for the connection of a camera
or camcorder:
L – R: For audio connection (left and right
sound channel respectively).
VIDEO: For the video signal.
To always activate these sockets by pressing, for
example, CAMERA on Beo4, you can register the
connected equipment in the CONNECTIONS
menu. For further information, refer to the
chapter 'Register additional video equipment' on
page 40.
PHONES
You can connect stereo headphones to the socket
marked PHONES. The television speakers are
muted when headphones are connected and
activated again when the headphones are
disconnected.
31