Bang & Olufsen BeoVision 7 Reference Book page 32

32
The socket panels on your television
allow you to connect signal input
cables as well as a variety of extra
equipment, such as a video recorder
or a linked Bang & Olufsen music
system.
Any equipment you connect to these
sockets must be registered in the
CONNECTIONS menu, for further
information, refer to the chapter
'Register additional video equipment'
on page 40.
For further information about
connecting speakers in a surround
sound setup, refer to the chapter
'Loudspeaker setup – surround sound'
on page 42.
Socket panels
Socket panel one
LINK TV OUT
Aerial output socket for distribution of video signals
to other rooms.
TV IN
Aerial input socket from your external aerial or cable
TV network.
DVB
For connection of an LNB. Only available if your
television is equipped with the optional DVB-S
module.
~
Connection to the mains.
STAND
For connection of a motorised stand.
AV 2
21-pin socket for the AV connection of additional
video equipment.
AV 1
21-pin socket for the connection of a
HDR 1, a set-top box, a primary decoder or a
BeoCord V 8000. You can also connect other
types of extra video equipment.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen music system. The socket is also used for
BeoLink distribution of sound throughout the
house.
POWER LINK CENTRE
For connection of a centre speaker such as
BeoLab 7. For further information about
connecting speakers, refer to the speaker's own
Guide.
TV IN DVB
LINK TV OUT
CINEMA CONTROL
If your television is equipped with the optional
Cinema Control feature, you can control, for
example, projector screen, lights and blinds with
the Beo4 remote control. Contact your Bang &
Olufsen retailer for further information.
STAND
AV 2 AV 1
MASTER LINK
CINEMA
CONTROL
POWER LINK
CENTRE