Use Your Television As A Computer Monitor - Bang & Olufsen BeoVision 7 Reference Book

If you connect your television to a
computer, as described on page 33,
you can use it as a monitor.
Remember to register your computer
in the CONNECTIONS menu. For
further information about how to
register the computer as a source,
refer to the AV4 menu in the chapter
'On-screen menus' on page 67.
IMPORTANT! If you wish to connect a
computer to the television and use the
television as a monitor, make sure that
you disconnect the television, the
computer, and all equipment connected
to the computer from the mains before
you connect the computer and the
television to each other.
When in use, the computer must be
connected to a grounded wall outlet as
specified in the computer's setting-up
instructions.

Use your television as a computer monitor

Bring up the computer image on the
screen
To see the computer picture on the television
screen, you must bring it up with Beo4.
To bring up the computer
picture ...
Press repeatedly until PC appears
in the Beo4 display
Press to bring up the picture
You can then operate the
computer as you normally would.
Picture and sound adjustments
When you have the computer picture on the
screen, you must call up the HDTV SETUP
menu to make adjustments to brightness,
contrast, colour and sound volume.
BRIGHTNESS
LIST
CONTRAST
PC
COLOUR
VOLUME
GO
> Press MENU to bring up the HDTV SETUP menu.
> Press or
options.
> Press or to adjust settings.
> Press GO to store your settings and exit the
menu.
The settings you make in this menu only apply to
the HDTV SETUP. Temporary volume adjustments
can be made as usual.
HDTV SETUP
31
31
31
40
to move between the menu
7