Bang & Olufsen BeoVision 7 Reference Book page 42

42
Add four Power Link speakers to your
setup and a BeoLab 2 subwoofer and
you have a surround sound system.
A surround sound setup fits easily
into your living room. Let the picture
determine your ideal listening and
viewing position. You get the best
sound experience in the area created
by the speakers.
Enter the distances to each speaker in
a menu.
In a surround sound setup, you must
calibrate the speakers. To calibrate
means to set the balance between
speakers. Refer to the following
pages for further instruction.
For further information about Home
cinema and connecting a projector,
refer to the chapter 'Connect a
projector for Home cinema' on page
38.
Loudspeaker setup – surround sound
Place external speakers
The four illustrations to the right show
examples of how you can place the television
and speakers in a surround sound setup.
The following guidelines apply for all speaker
setups:
– If you have two different sets of speakers, always
use your most powerful speakers as front
speakers.
– Place your speakers where you want them before
you connect them.
– Place your rear speakers on either side behind
your favourite listening position.
– You do not necessarily have to place the speakers
in the corners of the room.
– If you want to connect a BeoLab 2 subwoofer,
refer to the subwoofer's own Guide.