Bang & Olufsen BeoVision 7 Reference Book page 36

36
Connect a Bang & Olufsen recorder
Disconnect all involved systems from the mains
before you connect external equipment.
> Connect one end of a 21-pin AV cable to the AV
socket on the rear of the recorder.
> Then run the cable to the AV1 socket on the
back of the television.
If the connection between the television and
recorder is lost or not connected appropriately,
then CONNECTION LOST appears on the screen
when you try to program a timed recording.
Restore the connection and try again.
>> Connect additional video equipment
Video recorder
Aerial connection
Use your external aerial connection (or cable
TV network connection) and the aerial cable
supplied with the video recorder.
BeoVision
> Connect the cable from your external aerial to
the signal input socket marked
panel of the recorder.
> Direct the aerial signal to the television, using
the aerial cable supplied with the recorder.
> Plug one end into the socket marked 'TV' on
the recorder and the other end into the aerial
socket marked 'TV IN' on the television's socket
panel.
on the rear