Density And Color Balance Adjustment Procedure - Xerox DocuPrint NC60 User Manual

Density and Color Balance Adjustment Procedure

Density and Color Balance
Adjustment Procedure
4-4 DocuPrint NC60 User Guide
You may notice, over the course of using the printer, that
colors may change. For example, reds may begin to take
on a purple cast, or blues may take on a green cast. This
happens during the normal use of a color printer and can
be easily remedied by using the Density/Color Balance
Adjustment procedure described in the System
Administrator Guide on the DocuPrint CD.
This Control Panel procedure involves printing a test page
and adjusting the densities and colors based on the
appearance of the Test Page. You may need to repeat this
procedure and test your adjustments until you achieve
the desired effect.
See the System Administrator Guide on the DocuPrint CD
for instructions.