Adjusting Color Balance; Printing The Color Calibration Tutorial - Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

Color and Color Sampler Charts

Adjusting Color Balance

Over the life of the printer, colors may change. For example, reds may begin to take on a
purple cast, or blues may take on a green cast. This can happen during the normal use of a
color printer, during set-up or when toners and print cartridges are replaced. It can be
easily remedied by adjusting the color balance.
This front panel procedure involves printing a demonstration page, a series of test pages
and adjusting the colors based on the appearance of the test pages.
Note
At any time, you can reset the printer to the previous settings or to the factory
defaults.

Printing the Color Calibration Tutorial

The Color Calibration Tutorial contains an overview of the color adjustment procedure.
Before starting this procedure, print and review the Color Calibration Tutorial.
1. On the front panel, scroll to the
key.
2. Press the OK key.
3.
Select the
Improve Print Quality?
4. Press the OK key.
5.
Select the
Calibrate Colors Menu
6. Press the OK key.
7. Select the
Print Tutorial Page
key.
8. Press the OK key to print the tutorial page.
9. Follow the instructions on this page to adjust the color balance.
18
menu by pressing the Up or Down Arrow
Support
menu by pressing the Down or Up Arrow key.
by pressing the Down or Up Arrow key.
menu item by pressing the Down or Up Arrow
Phaser 7700 Color Printer