Netware; Starting Pconsole; Defining The Print Queue; Defining The Print Server - NEC SuperScript 4200 Network Manual

Superscript color laser
Table of Contents

Advertisement

N
W
3.
ET
ARE
X
Complete these basic tasks to configure NetWare 3.x bindery-
based services for your printer. Begin by:

Starting PCONSOLE

Log in to NetWare 3.x with Administrator rights and start
PCONSOLE.
Defining the Print Queue
1.
Select Print Queue Information from the Available
Options menu and press
2. Press
, type a name for the new queue to be
INSERT
serviced by the NIC and press
return to the Available Options Menu.
Defining the Print Server
1.
Select Print Server Information from the Available
Options menu and press
2. Press
, type the NIC Print Server Name and press
INSERT
.
ENTER
note:
The Print Server Name you enter should match
the name shown on the Network Settings page under
Novell Network Information.
Defining the Printer
1.
Press
with the new Print Server Highlighted,
ENTER
select Print Server Configuration and press
select Printer Configuration and press
2. In the Configured Printers list, select an unused printer
number and press
ENTER
Configuration screen, define a new name for the printer
if desired. (The printer name is displayed in various
NetWare printing messages.)
3.
Press
to exit and select Yes to save the changes.
ESCAPE
Press
again to return to the Printer Server
ESCAPE
Configuration menu.

Assigning the Print Queue

1.
Select Queues Serviced By Printer and press
Highlight the desired printer on the Defined Printers list
and press
.
ENTER
2. Press
to display the Available Queues list. Select
INSERT
32
SuperScript Color Laser Network Guide
.
ENTER
. Press
ENTER
ESCAPE
.
ENTER
, then
ENTER
.
ENTER
. In the Printer <#>
ENTER
the desired queue and press
level (recommended choice is 1) and press
3.
Press
Alt-F10
Confirming Successful Configuration
1. Turn the printer off and on and wait for a Network
Settings page to print. If the network is large, this may
take several minutes.
2. The Novell Connection Information area on the Network
Settings page displays the printer name, file server,
queue, etc. If it displays Attached: Yes, this confirms that
the NIC Print Server is ready to accept print jobs. If not,
verify that the Print Server name matches exactly the
to
Print Server name that was entered in PCONSOLE.
Check the Novell Connection
Information area on the
Network Settings page. If you
experience difficulty call NEC
printer tech support at 1-800-
632-4650.
Installing and Configuring Your Printer Driver
In Windows, use the Add Printer feature to install and
configure a SuperScript printer driver in each workstation
that will access the network printer.
note:
SuperScript printer drivers are on the SuperScript
CD that came with the printer.
Specify that the printer will be attached as a Network Printer,
and set the Port to the printer queue you just created. (The
.
Windows NT 4.0 driver installs automatically to LPT1:. After
installation, you can manually reset the port to your NetWare
queue.)
. Assign a Priority
ENTER
to exit PCONSOLE.
.
ENTER

Advertisement

Table of Contents
loading

Table of Contents