Set Up Left Softkey To Access Messages; Change Phone Display Brightness; Change Screen Display Time - Cisco 7925G User Manual

Set Up Left Softkey to Access Messages

Set Up Left Softkey to Access Messages
Procedure
Step 1
Choose
Step 2 Press Change.
Step 3 Select Message.
Step 4
Press Save. The left softkey displays as Message when the phone is idle.

Change Phone Display Brightness

Procedure
Step 1
Choose
Step 2
Highlight Display Brightness, and then press
Step 3
Press to increase the brightness or to decrease the brightness.
Step 4 Press Save to make the change or press Cancel.

Change Screen Display Time

Procedure
Step 1
Choose
Step 2
Highlight Display Timeout, and then press
Step 3 Select one of the following:
• 10 Seconds
• 30 Seconds (default setting)
• 1 Minute
• 2 Minutes
Step 4 Press Save to make the change or press Cancel.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
98
> Phone Settings > Customize Home Page.
> Phone Settings > Display Settings.
> Phone Settings > Display Settings.
or Change.
or Change.
Phone Customization