Buttons And Hardware - Cisco 7925G User Manual

Features of Your Cisco Unified Wireless IP Phone
present in the air and where a classified hazard does not normally exist but is possible under abnormal
conditions.

Buttons and Hardware

The following figure shows the Cisco Unified Wireless IP Phone 7926G. The Cisco Unified Wireless IP
Phone 7925G and 7925G-EX are similar in appearance to the Cisco Unified Wireless IP Phone 7926G. The
following table describes the functions of the keys on the phones.
1 Indicator light (LED) Provides these indications:
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
• Solid red: Phone is connected to AC power source and battery is
charging.
• Solid green: Phone is connected to AC power source and battery
is fully charged.
• Fast blinking red: There is an incoming call. Phone can be charging
or fully charged.
• Slow blinking red: There is a voice message. When phone is
connected to AC power source, the red light displays longer than
when using only the battery.
• Slow blinking green (every 2 seconds): Phone is using only battery
power. Phone is registered with the wireless network and is within
service coverage area.
Buttons and Hardware
5